HomemadeTurbo - DIY Turbo Forum
Page 4 of 4
1
2
3
4
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   GSR OIL SQUIRTERS IN A LS BLOCK. PICS (https://www.homemadeturbo.com/hybrid-tech-8/gsr-oil-squirters-ls-block-pics-90115/)

gen4acclude 03-17-2008 08:29 PM
Re: GSR OIL SQUIRTERS IN A LS BLOCK. PICS
 
ok then go ---- your self i give you a compliment and offer to help find a link for your future project and you then critizes me cause you think its to much

mugenblacky16 03-18-2008 01:13 AM
Re: GSR OIL SQUIRTERS IN A LS BLOCK. PICS
 
Originally Posted by gen4acclude
ok then go ---- your self i give you a compliment and offer to help find a link for your future project and you then critizes me cause you think its to much
I wasn't critizing you. I just wanted to show a route that can be done in someones garage with basic tools. Iid like to see the link. Sorry you took it worry.

mugenblacky16 03-18-2008 01:20 AM
Re: GSR OIL SQUIRTERS IN A LS BLOCK. PICS
 
Originally Posted by whiterice
good job. do a write up for the ls/vtec even though it can be found everywhere.
when you going to get it running?
Thanks. I'll keep taking pics and try to put a write-up together. Should be alittle abnormal because of my oil squirters and I'm gonna try to make my own internal oil passage to feed the vtec head. Most LS/vtec setups run an external feed line, but I like trying something new. Car should be running in the next couple weeks.

SDRAWKCAB 03-18-2008 01:30 AM
Re: GSR OIL SQUIRTERS IN A LS BLOCK. PICS
 
Originally Posted by gen4acclude
ok then go ---- your self i give you a compliment and offer to help find a link for your future project and you then critizes me cause you think its to much
You are such a ------- tool bag.

ryan2l 03-19-2008 12:42 AM
Re: GSR OIL SQUIRTERS IN A LS BLOCK. PICS
 
Nice write up. On a side note if I mail you my ecu with a chip kit will you solder it for me?

buk9tp 03-19-2008 02:05 AM
Re: GSR OIL SQUIRTERS IN A LS BLOCK. PICS
 
i like your write up style.. lots of pics.. very detailed.. please do a lsvtec write up..

thanks.

tallkan 03-19-2008 07:12 PM
Re: GSR OIL SQUIRTERS IN A LS BLOCK. PICS
 
Originally Posted by mugenblacky16
$150-$250?!?! The whole point is to do it yourself for cheap without involving a machine shop.
Hella gangsta if u can grind down your own rods and get em back on the piston wit out crackin a piston or grindn the rod uneven. good setup tho i ran it in my crx 4 2 years no probs till it got jacked

mugenblacky16 03-20-2008 02:18 AM
Re: GSR OIL SQUIRTERS IN A LS BLOCK. PICS
 
Originally Posted by ryan2l
Nice write up. On a side note if I mail you my ecu with a chip kit will you solder it for me?
Hey. I'll text you my address over here.


All times are GMT -5. The time now is 08:49 AM.
Page 4 of 4
1
2
3
4
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands