a good home made exhaust gasket
what would make a good home made exhaust gasket, where the downpipe meets the exhaust? thnx
|
Re:a good home made exhaust gasket
sheet metal
|
Re:a good home made exhaust gasket
nothing.
|
Re:a good home made exhaust gasket
I would try sheet metal with some copper spray.
|
Re:a good home made exhaust gasket
don't use sheet metal anywhere near the exhaust manifold. It might work on the lower half of the downpipe but not where it gets really hot.
|
Re:a good home made exhaust gasket
Originally Posted by RacenSi04
what would make a good home made exhaust gasket, where the downpipe meets the exhaust? thnx
|
Re:a good home made exhaust gasket
good idea to use the flex pipe. if u dont want to use clamps and want to have have everthing welded u can use the flex pipe and use some type of a 3 bolt joint, weld it up and and then u can unbolt ur dp from the rest of the exhaust. www.summitracing.com
|
Re:a good home made exhaust gasket
why not get some gasket material from an auto parts store and make one from that? The kind with cardboard over the metal core.
|
Re:a good home made exhaust gasket
Originally Posted by alwaystootall
good idea to use the flex pipe. if u dont want to use clamps and want to have have everthing welded u can use the flex pipe and use some type of a 3 bolt joint, weld it up and and then u can unbolt ur dp from the rest of the exhaust. www.summitracing.com
Have you ever tired to weld flexpipe? it is paper thing almost and welds like ----. Clamp it....it isn't worth the time to weld, not to mention when you go to pull that ---- back apart, it is just loosening the clamps. |
Re:a good home made exhaust gasket
thought u were talking about something like this http://cgi.ebay.com/ebaymotors/ws/eB...category=33633
|
All times are GMT -5. The time now is 12:03 PM. |
© 2024 MH Sub I, LLC dba Internet Brands