a good home made exhaust gasket
what would make a good home made exhaust gasket, where the downpipe meets the exhaust? thnx
|
Re:a good home made exhaust gasket
sheet metal
|
Re:a good home made exhaust gasket
nothing.
|
Re:a good home made exhaust gasket
I would try sheet metal with some copper spray.
|
Re:a good home made exhaust gasket
don't use sheet metal anywhere near the exhaust manifold. It might work on the lower half of the downpipe but not where it gets really hot.
|
Re:a good home made exhaust gasket
Originally Posted by RacenSi04
what would make a good home made exhaust gasket, where the downpipe meets the exhaust? thnx
|
Re:a good home made exhaust gasket
good idea to use the flex pipe. if u dont want to use clamps and want to have have everthing welded u can use the flex pipe and use some type of a 3 bolt joint, weld it up and and then u can unbolt ur dp from the rest of the exhaust. www.summitracing.com
|
Re:a good home made exhaust gasket
why not get some gasket material from an auto parts store and make one from that? The kind with cardboard over the metal core.
|
Re:a good home made exhaust gasket
Originally Posted by alwaystootall
good idea to use the flex pipe. if u dont want to use clamps and want to have have everthing welded u can use the flex pipe and use some type of a 3 bolt joint, weld it up and and then u can unbolt ur dp from the rest of the exhaust. www.summitracing.com
Have you ever tired to weld flexpipe? it is paper thing almost and welds like ----. Clamp it....it isn't worth the time to weld, not to mention when you go to pull that ---- back apart, it is just loosening the clamps. |
Re:a good home made exhaust gasket
thought u were talking about something like this http://cgi.ebay.com/ebaymotors/ws/eB...category=33633
|
Re:a good home made exhaust gasket
Originally Posted by alwaystootall
thought u were talking about something like this http://cgi.ebay.com/ebaymotors/ws/eB...category=33633
---- naw...thats way too much $ to spend...this is hmt y0 ;) im saying a cheap piece something like this http://www.zimmermann-models.com/Zim...s/flexpipe.jpg they are like $5-6 bucks and you get a clamp wtih it so you only need 1 more clamp :) |
Re:a good home made exhaust gasket
in that case... clamps :)
|
Re:a good home made exhaust gasket
yeah good idea, this is HMT.com, so,... were all a bunch ro broke asses, i was gonna go try come liquid gfasket, but again,.. im broke,... well ima try the cheap flex pipe see how it works,.. thnx for the help
|
Re:a good home made exhaust gasket
Did you check to see how much an exhaust donut gasket is, you should be able to get one just as cheap as the flex pipe?!? ???
|
Re:a good home made exhaust gasket
why would you want to make a home made gasket? exhaust gasket material is like 3 cents a cubic inch. its thick, metal, and it works good in between my turbo and downpipe. :-\
|
Re:a good home made exhaust gasket
Originally Posted by Spenser
why would you want to make a home made gasket? exhaust gasket material is like 3 cents a cubic inch. its thick, metal, and it works good in between my turbo and downpipe. :-\
|
Re:a good home made exhaust gasket
wouldnt it be easier to spend like the $3.00 if that to buy the gasket?
|
Re:a good home made exhaust gasket
Originally Posted by B16CRXT
Originally Posted by Spenser
why would you want to make a home made gasket? exhaust gasket material is like 3 cents a cubic inch. its thick, metal, and it works good in between my turbo and downpipe. :-\
|
All times are GMT -5. The time now is 05:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands