gear swap?
12-12-2008, 12:06 AM
#1
0.0 BAR
Thread Starter
Join Date: Oct 2004
Posts: 0
gear swap?
Okay so I have all the parts for my ls build now I want to move on to the tranny. Any suggestions would help I have a stock ls tranny my question is can I use gear out of an si or gsr tranny? Should I go with a si or gsr tranny? This car will be mostly a quarter mile car so yah.
12-12-2008, 02:37 AM
#5
!! UNCONFIRMED EMAIL !!
Join Date: Dec 2002
Posts: 6,656
Re: gear swap?
i personally LOVE the ITR/B16 tranny for all setups. 
specially in boost. but if your running a stock LS head, that ---- is gonna be gay. cuz even on 24.5 slicks, thats still like 112mph at the top of 4th with a stockish 7500rpm revlimit. stock LS gets you over 130mph. GSR 120mph...
rev it higher, get a couple more mph...
if you deside you wanna swap gears around, i have a B16A2 gear stack ill sell ya...
specially in boost. but if your running a stock LS head, that ---- is gonna be gay. cuz even on 24.5 slicks, thats still like 112mph at the top of 4th with a stockish 7500rpm revlimit. stock LS gets you over 130mph. GSR 120mph...rev it higher, get a couple more mph...
if you deside you wanna swap gears around, i have a B16A2 gear stack ill sell ya...
12-12-2008, 02:45 AM
#6
!! UNCONFIRMED EMAIL !!
Join Date: Dec 2002
Posts: 6,656
12-26-2008, 05:35 PM
#9
0.0 BAR
Join Date: Apr 2006
Posts: 0
Re: gear swap?
Originally Posted by jdmhatchracer94
okay so after using the calculaot I will use the ls trans but with a 4.4 fd question is when changing the ring gear do I need to change the pinion also?
12-26-2008, 09:20 PM
#10
Guest
Posts: n/a
Re: gear swap?
TurboHf I can't find the thread you were asking about 1gen integra dseries trannys in so I'll just say it here. According to Bone and Fowee Bisi use's those tranny's because the have a support in the center of the imput and output shafts that keep them from flexing apart.
