Funky problems with F22b1 after engine swap. NECESSITO ASSISTANCE!
#12
Re: Funky problems with F22b1 after engine swap. NECESSITO ASSISTANCE!
Originally Posted by crx88Si
bad plug wires on 1 & 2.
try swapping wires between 2 & 3
try swapping wires between 2 & 3
if only 1 and 4 work, it could be a bad ignitor if nothing else has changed in the harness. i guess if could be the ecu too so try swapping it. but if that hasnt changed it would be the cause of it either. are you using a new dizzy? considering its a dohc swap i assume it is. the ignitor was bad on my swap too. you can use the same ignitor from your stock diszzy. its just a bitch to swap the parts over.mm wait im not sure if they will swap over since your car is a 94 but its worth a try.
#13
Re: Funky problems with F22b1 after engine swap. NECESSITO ASSISTANCE!
its the SOHC F22b Vtec. I have a new ecu on the way and I am hoping that is the problem, if not I will replace the ignitor and keep trying to narrow down what it could be.
#14
Re: Funky problems with F22b1 after engine swap. NECESSITO ASSISTANCE!
Tried a new ECU. Didnt fix anything.
Something else that might be of importance - since the motor swap and install of a P28 with Uber, the speedo no longer works.
Something else that might be of importance - since the motor swap and install of a P28 with Uber, the speedo no longer works.
#15
Re: Funky problems with F22b1 after engine swap. NECESSITO ASSISTANCE!
A thought on the speedo problem... the VSS cable sometimes seems like it's in all the way but you gotta fiddle with it to get it ALL the way in. This coming from a D-series guy though. I'm not sure if it would apply to an F22. My two cents.
Thread
Thread Starter
Forum
Replies
Last Post
Smith-02
Forced Induction
11
07-05-2006 09:52 PM