Im in the market for a fuel because Im a dirty ricer and I think its important for my vitara build .
Plus its cheap.
I just wanted to know if it will work with RC or Precision injectors.
The auction states Bosch style injectors and bigger. It wont work with stock injector sizes.
So am I a ------- idiot or are Precision and RCs bigger than stock.

http://cgi.ebay.com/ebaymotors/Mr-Ga...mZ270157525070

 

OK i must be a dumbass

 

NO BODY KNOWS?

 

RC and Precision make all different size of injectors. I don't know if honda's use 11 or 14mm injectors. Easiest thing to do would measure the stock rail.

 

the rail in the auction states that the injectors must be 14mm and i cant find info on Precision or TTs injectors.
Im running dsm 1g 390ccs right now but i need to know when i upgrade.
Could this be fixed buy buying some bigger o rings?

 

most likely bigger o rings will work to fill a 3mm gap brian. why buy an ebay special?? try a BDL thier sorta cheap

 

Its mr. gasket and ther 40 bucks.

 

the BDL one says "high flow" tho

 

RC injectors start their life off as a 14MM o-ring style injector but are turned down to fit the smaller 11mm o-ring style rails for Hondas. Your "Honda" RC injectors will not work if rail is designed for the 14mm style injectors. We sell the same injectors as RC and PT. They come with the 14mm o-ring if you wanted to use this rail rail. We purchase them in large lots. If you need a set before the modification is done to the injector let me know and I can help.