trying to get the bitch started... one thing after another. It seems as if my injectors are stuck open. When i probe the wires with the power probe, i dont hear injector pulse while cranking. Its also flooding. Bad injectors or could it be the ecu or something else? Injector wiring should be correct. I have 12 volts at all of them, and the correct 13.5 ohms of resistance.

 

Perhaps a bad ecu or bad ground? Bad burn if your ecu is chipped?

 

bad ecu is a maybe..

i only know of 2 grounds, trans and valve cover. They are both good

I just did a re-burn before i started it.

 

There's a ground for all your sensors/misc. stuff on the T-stat housing as well. Forget to put this one on and it'll play hell with everything engine related.

 

yea i know, ive done that before

i think i wired my injectors wrong. Anyone know what side of an RC injector is positave?

 

It does not matter. When the ECU fires the ground to fire the injector it completes the circuit. Not really a need to know what is "positive" or "negative" on an injector. If you are having trouble with the injectors and have narrowed it down to them being stuck open/closed (very common problem) or not working properly let me know and I can help. http://kgparts.com/index.php?page=fuelinjectclean