Re: Frustrated with pos civic
dizzy you might be getting spark but not enough right after i turbod mine it went bad
|
Re: Frustrated with pos civic
Originally Posted by crx4life2003
still nothing with the car....I reloaded a couple maps on the s300 and im still gettin nuttin. The car has 150psi on all cylinders which is low but the motor should still run. Im gunna pull the pan later this week and see what the ---- I bought. The car is worth what I paid for it, clean 96 ek with 90k 5 lug swap with Itr wheels. The motor has all high end parts on it....probably stolen. I am just at a complete loss as to how that can happen? I was getting some white smoke before it stalled out. I thought I might have blown some ring lands but I wouldnt be regestering even compression would I? I tested the compression on a cold motor open header with the throttle plate open. Car should start with no header on it correct?
|
Re: Frustrated with pos civic
Well I have built a couple of motors of motors in my day including swap but this work isnt mine. The car is wired in with a mustang throttle body and a 3 bar map sensor. My point is even if the ringlands are blown 150 psi should still fire up. What about alternator? Would the car start with a bad alternater?
|
Re: Frustrated with pos civic
Check the main relay, its a common problem with civics, causing intermittent starting problems although nothing else seems to be wrong.
|
Re: Frustrated with pos civic
and the car will still start up with a bad alternator so long as the battery is fine, just you won't be able to drive far as the battery will die :P
|
All times are GMT -5. The time now is 03:04 PM. |
© 2024 MH Sub I, LLC dba Internet Brands