dpfi to mpfi wiring troubles....
#1
dpfi to mpfi wiring troubles....
The #3 cylinder doesn't seem to be firing, it is on a dohc zc....we pulled the spark plug and we have spark, but the exhaust port is majorly wet and it sounds like a harley
we got the singal wire for that injector from the red off of the main injector
any ideas?
we got the singal wire for that injector from the red off of the main injector
any ideas?
#3
Re:dpfi to mpfi wiring troubles....
you say its not firing but when u pull out the wire it sparks? i dont get it? if u have spark and fuel i dont see what the problem is. like jung4g said check the injector. might be fucked or check your wiring to the injectors
#4
Re:dpfi to mpfi wiring troubles....
NATE YOU FORGOT TO MENTION that smoke was coming out of the TB...
Anyways... I talked several people at work about the problem they are thinking a valve is stuck... they said we could test by doing a compression test.... so if you have your tool bring that with you when you come down on sat.
Eric
Anyways... I talked several people at work about the problem they are thinking a valve is stuck... they said we could test by doing a compression test.... so if you have your tool bring that with you when you come down on sat.
Eric
#6
Re:dpfi to mpfi wiring troubles....
there are no check engine lights,
we pulled the spark plug and tested it and it had spark.
if it was a valve, we would hear it.
this motor and seutp was perfectly good running and all of that about a month ago.
im thinkin iti s just a wiring issue.
we pulled the spark plug and tested it and it had spark.
if it was a valve, we would hear it.
this motor and seutp was perfectly good running and all of that about a month ago.
im thinkin iti s just a wiring issue.
Thread
Thread Starter
Forum
Replies
Last Post