bigdturbo

I tried checking all my connections at the computer. They all match according to the factory honda manual. Meaning all added wires and wires that were moved are in the correct place for the Si computer pin out. Is there any other wires that need to be added or cut? Other than the dist. wires.

Zeniceguycrx

u have to add injectors, wires for them, lots of ----, figourout one thing that isnt working and fix that, then the next and so on

bigdturbo

I did add the injector wires. Maybe I was unclear. I have the car running, timing is @ 18 deg. It's just that the ecu keeps throwing code 9. I tried putting the dist. in my other car that is converted( someone else did the conversion before I bought the car) and it doesn't throw the code 9. Swaped the computer from problem car to previously converted car and still no code. So I figured it must be the wires from the dist. connector to the ecu since it's direct. So I tested resistance from dist. connector to ecu connector and it's within specs. So I was just wondering if there is anything else that needs to be done other than the obvious.