DIY injector rebuild!
Thread Starter
0.0 BAR
Joined: Feb 2003
Posts: 0
DIY injector rebuild!
http://fordfuelinjection.com/index.php?p=82
To flow them, just buy the $69 Matco fuel injector tester and squirt fluid into a graduated cylinder. Compare the amount of fluid squirted for every X presses of the button, and viola - flow.
To flow them, just buy the $69 Matco fuel injector tester and squirt fluid into a graduated cylinder. Compare the amount of fluid squirted for every X presses of the button, and viola - flow.
Guest
Posts: n/a
Re: DIY injector rebuild!
Nice info. But for $69... you could get a whole nother set of DSM's 
Whitey had a post a while back with a DIY injector cleaning using an air pump. One for a bicycle or basketball I believe, ultimate hmt stylez
oops not whitey. https://www.homemadeturbo.com/forum/...?topic=31532.0
Whitey had a post a while back with a DIY injector cleaning using an air pump. One for a bicycle or basketball I believe, ultimate hmt stylez
oops not whitey. https://www.homemadeturbo.com/forum/...?topic=31532.0
Thread Starter
0.0 BAR
Joined: Feb 2003
Posts: 0
Re: DIY injector rebuild!
For $10 you could also build a 555 timer and use an old vhold transistor out of a broken computer monitor dropped across a resistor (box). I was afraid I might lose a few people going that route...
... that other writeup rocks my nards, though!
... that other writeup rocks my nards, though!
3.0 BAR
Joined: Sep 2003
Posts: 3,751
Re: DIY injector rebuild!
beater had a source for cleaning/balancing injectors for 10.00 a piece. I emailed the company and was going to do it, but never got around to it.
"beater" if you see this can you pipe up with the link?
edit: found this in the DIY Cleaning link
http://www.cruzinperformance.com/fuelinj.html
"beater" if you see this can you pipe up with the link?
edit: found this in the DIY Cleaning link
http://www.cruzinperformance.com/fuelinj.html
Thread
Thread Starter
Forum
Replies
Last Post
OneBadV6
Forced Induction
9
Jan 25, 2011 05:45 PM
