D16Z6 in a CRX Si, verification and questions
hey im going to be picking up a Z6 here pretty soon and im going to put it in my crx just had a couple questions and wanted to make sure i didnt miss anything
i know i need the P28 and the Z6 distributor as well as the obd0 to obd1 wiring conversion and the vtec wiring i use the crx mounts on the Z6 correct? i guess thats really all there is to it, am i missing anything |
Re: D16Z6 in a CRX Si, verification and questions
almost forgot, will the A6 injectors be enough to run the Z6? are they the same cfm?
|
Re: D16Z6 in a CRX Si, verification and questions
same injector size
|
Re: D16Z6 in a CRX Si, verification and questions
should i use the A6 intake or the Z6?
i assume the Z6 has sensors that i need with the P28 |
Re: D16Z6 in a CRX Si, verification and questions
both have same sensors really up to you. I prefer the z6
|
Re: D16Z6 in a CRX Si, verification and questions
thanks
|
Re: D16Z6 in a CRX Si, verification and questions
almost forgot
is it easy to incorporate a dash mounted CEL? |
Re: D16Z6 in a CRX Si, verification and questions
anything else i should know?
|
Re: D16Z6 in a CRX Si, verification and questions
going obd1 will require you to convert to a 4-wire o2 sensor too.
which u may need to buy. Map sensor from the EF (CRX) is on the firewall, the z6 intake manifold has it's own, on top of the throttle body |
Re: D16Z6 in a CRX Si, verification and questions
and i believe you take the driver side mount bracket of the a6 and put it on the z6 while still using the crx mount
|
All times are GMT -5. The time now is 07:45 AM. |
© 2024 MH Sub I, LLC dba Internet Brands