D16a6 into 1990 CRX HF. What is needed?
03-02-2006, 09:09 PM
#1
1.0 BAR
Thread Starter
Join Date: May 2005
Posts: 305
D16a6 into 1990 CRX HF. What is needed?
What plugs are missing from the HF engine harness that the Si engine harness has? What has to be added? Or is it a direct bolt in swap? What else do i need? I dont need to change the hubs do i?
03-02-2006, 10:43 PM
#2
1.0 BAR
Join Date: Feb 2004
Posts: 577
Re: D16a6 into 1990 CRX HF. What is needed?
A little search won't kill next time. Anyways HF harness is almost the same as the si, excpet it has extra plugs for egr and something else (don't recall), so you can reuse your hf harness without mod. You can keep your hf knuckle and hubs only if you're using the hf tranny, if not than you have to change them. Other than that direct bolt on.
03-02-2006, 10:53 PM
#3
0.0 BAR
Join Date: Dec 2002
Posts: 0
Re: D16a6 into 1990 CRX HF. What is needed?
Nope you can use the si trans with hf axles. Inner cup is the same its the outer on the si that is different. Direct bolt in. Dont bother with the hf trans its garbage atleast get a dx at the least
03-02-2006, 10:58 PM
#4
1.0 BAR
Join Date: Feb 2004
Posts: 577
Re: D16a6 into 1990 CRX HF. What is needed?
Originally Posted by chris
Nope you can use the si trans with hf axles. Inner cup is the same its the outer on the si that is different. Direct bolt in. Dont bother with the hf trans its garbage atleast get a dx at the least
Thread
Thread Starter
Forum
Replies
Last Post
90turboteg
General Discussion
4
09-06-2005 12:43 AM
streetracer42084
General Discussion
15
06-21-2004 01:35 AM
