d15 and d16 block
 

does the d15 model 1989 in and d16z6 block is the same ?.

Re: d15 and d16 block
 

soft of but the deck hight, the stroke, the rods, the head, and the pistons are diffrant


wait i guess there nothing realy alike then :P


what information are you trying to figgure out exactly??

Re: d15 and d16 block
 

i need to put vitara pistons and d16z6 rods and vtec head in d15b block and turbo it.

i know it may be confusing but that becuse law in my city ( free zone area) cant use motor more than 1500 cc :(

my city is port said EGYPT

Re: d15 and d16 block
 

Then here is what you do. You bore out the block to a 1.6 and put the vtec head on there with the pistons. Instant 1.6 liter.

Re: d15 and d16 block
 

bore is the same sorry but the deck height is diffrant


not sure if vitaras fit with d16 rods probly will stick out to much but i know with d15 rods it will be to low compression

Re: d15 and d16 block
 

is not that good for turbo project ?

Re: d15 and d16 block
 

Just to make sure, your block code is just D15B? not D15B1 or D15B2?

Re: d15 and d16 block
 

no not realy were talking compression in the 7.5:1 area and if you ever want to spool any thing decent its going to take a while with that kind of compression

Re: d15 and d16 block
 

i will check today which d15b it is. its crx 1989 the its DPfi which has smal carb. above the engine.

Re: d15 and d16 block
 

i checked it today. yes its d15b2 . so i cant install vitara pistons , z6 rods,z6 cranck,z6 sleaves in this d15b2 block ?