d15 and d16 block
does the d15 model 1989 in and d16z6 block is the same ?.
|
Re: d15 and d16 block
soft of but the deck hight, the stroke, the rods, the head, and the pistons are diffrant
wait i guess there nothing realy alike then :P what information are you trying to figgure out exactly?? |
Re: d15 and d16 block
i need to put vitara pistons and d16z6 rods and vtec head in d15b block and turbo it.
i know it may be confusing but that becuse law in my city ( free zone area) cant use motor more than 1500 cc :( my city is port said EGYPT |
Re: d15 and d16 block
Then here is what you do. You bore out the block to a 1.6 and put the vtec head on there with the pistons. Instant 1.6 liter.
|
Re: d15 and d16 block
Originally Posted by crxrx7
Then here is what you do. You bore out the block to a 1.6 and put the vtec head on there with the pistons. Instant 1.6 liter.
not sure if vitaras fit with d16 rods probly will stick out to much but i know with d15 rods it will be to low compression |
Re: d15 and d16 block
Originally Posted by aarontrini85
but i know with d15 rods it will be to low compression |
Re: d15 and d16 block
Originally Posted by hany
i need to put vitara pistons and d16z6 rods and vtec head in d15b block and turbo it
|
Re: d15 and d16 block
no not realy were talking compression in the 7.5:1 area and if you ever want to spool any thing decent its going to take a while with that kind of compression
|
Re: d15 and d16 block
Originally Posted by whiterice
Just to make sure, your block code is just D15B? not D15B1 or D15B2?
|
Re: d15 and d16 block
i checked it today. yes its d15b2 . so i cant install vitara pistons , z6 rods,z6 cranck,z6 sleaves in this d15b2 block ?
|
Re: d15 and d16 block
A6 block with Z6 head. /thread
|
Re: d15 and d16 block
ok i will install d15b vtec jdm
but i have question (stubid q) does the d15b vtec jdm rods and d16z6 are the same ? what is the deferance between d15b vtec jdm pistons and d16z6 pistons? question in other way how come the 100 cc deferance between d15b jdm vtec (1500) and the d16z6 (1600) |
Re: d15 and d16 block
i read again and notice that the d15b vtec and the d16z6 pistons are the same bore (75mm) but they are deferant at the strock is not ?
|
All times are GMT -5. The time now is 05:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands