D Series Distributors, All The Same????
 

Are all D-series distributors the same?

Cause i want to install a D15Z1 on my cousins CX Hatch.

DO i have to use the one that came off the Z1 or a Z6, or will i be good with the one thats in his current engine right now? also i know i need to get a P28 to have it run good, anything else i might be missing? i know im gonna have to hook up the VTEC solenoid to the ECU,

Any link to a sight that has the pinout... or diagram would be appreciated. thanks... guys...

Re:D Series Distributors, All The Same????
 

The dizzy will work...I don't know how the mounting point are, maybe some cutting here or there or only tighten it on 2 bolts

Re:D Series Distributors, All The Same????
 

d series dizzy's are not all the same, there is the obd 0 dizzies for the 88-91 civics, and the obd 1 dizzies for the 92-95? civics, and then obd 2 for the 96 and above.....The dizzy u will need is a obd 1..

Re:D Series Distributors, All The Same????
 

there are obd0, obd1, obd2-a, and obd2-b. and also there is vtec ones and non vtec ones. just get the one for that car and motor.

Re:D Series Distributors, All The Same????
 

dont forget DPFI and MPFI

Re:D Series Distributors, All The Same????
 

i cant beleive my eyes!!!! you need only run the OBD1 distributor.

Re:D Series Distributors, All The Same????
 

Both dizzy he has are OBD1...read fella's

Re:D Series Distributors, All The Same????
 

go by the OBD of the engine/ecu.

Re:D Series Distributors, All The Same????
 

i hope you use at least a DX tranny and a P28 ecu in the CX, if you want him to notice a difference..