mycrx

im about to order one from ebay, but can i use my old busings and ---- for where the stabilizer bolts to the tranny? hows that all work out here is a link.

http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW

InfernoSoul

Are the old busings still good? If so you shouldn't have a problem.

yellowcrx6

when i ordered my linkage before, i got it from jdmshit.com. i had to cut the circle end where the bushing goes and make it smaller for the d-series bushing to fit. it was 2 much of a pain to try and get one from the junkyard.

mycrx

so i would need to get one from like a teg shift linkage instead of just using my d-series one? how much r they from the auto parts?

yellowcrx6

no one had a c clue what i was talking about when i tried to find one. if the cars at the junkyard werent sitting on the ground here, you could just rip one off the linkage.

Project CRXtacy

i have one from a ef, it was made by a performance shop it was made adjustable so you could just twist it if you wanna go back to d from b. bushings, shifter, and rear u mount rubber&metal, and adjustable linkage included 75 shipped

HMT-Admin

Your gonna want to use the 90-93 teg bushings on the trans side. The bushing is alot bigger than a d series.

mycrx

its fine now i just bought a whole shiftlinkage cause i was tired of ------ with ----, might as well do it right the 1st time.