crx exhaust
07-18-2006, 05:42 PM
#1
0.5 BAR
Thread Starter
Join Date: Jan 2003
Posts: 83
crx exhaust
will all 88-91 crx exhaust system fit each other cause i was looking at this
http://cgi.ebay.com/ebaymotors/TSUDO...07800370QQrdZ1
and it says this exhaust will not fit the HF models. do they mean HF as in civic or the CRX HF models. if its the CRX models how do i know if i have an HF i know i dont have an SI.
http://cgi.ebay.com/ebaymotors/TSUDO...07800370QQrdZ1
and it says this exhaust will not fit the HF models. do they mean HF as in civic or the CRX HF models. if its the CRX models how do i know if i have an HF i know i dont have an SI.
07-18-2006, 07:07 PM
#3
1.5 BAR
Join Date: Mar 2006
Posts: 835
Re: crx exhaust
if its MPFI and not an SI its an HF, if its DPI its an STD. you would most likely know if it where an HF, so i would say you probably have the STD model. thats a descent catback and should work fine on the SI, i dont believe it will bolt straight up to the HF or STD though.
07-18-2006, 07:37 PM
#4
0.5 BAR
Thread Starter
Join Date: Jan 2003
Posts: 83
Re: crx exhaust
the problem is i bought the car as a shell and it doesnt have anything on the back of the car to know witch model it is. its a 91 crx the eigne harness is still there. it has two injectors but someone wired it for four if that helps.
if i bought the exhaust how bad would the fitment be and what part of the exhaust is different.
if i bought the exhaust how bad would the fitment be and what part of the exhaust is different.
07-18-2006, 07:39 PM
#5
0.5 BAR
Thread Starter
Join Date: Jan 2003
Posts: 83
Re: crx exhaust
Originally Posted by CSaddict
I have that fine piece of chinese swag on my car right now. It fits good. You will know if you have an HF because it will say HF on the back of your car. Other than that open you hood.
07-18-2006, 07:58 PM
#7
0.5 BAR
Thread Starter
Join Date: Jan 2003
Posts: 83
Re: crx exhaust
Originally Posted by slo_crx1
The reason it says "won't fit hf models" is because the hf's have the cat right after those nice turbo manifolds 
If it's just a shell you have nothing to worry about...it'll fit just fine
If it's just a shell you have nothing to worry about...it'll fit just fine
07-18-2006, 09:29 PM
#8
1.5 BAR
Join Date: Mar 2006
Posts: 835
Re: crx exhaust
Originally Posted by slo_crx1
The reason it says "won't fit hf models" is because the hf's have the cat right after those nice turbo manifolds If it's just a shell you have nothing to worry about...it'll fit just fine
If it's just a shell you have nothing to worry about...it'll fit just fine
07-24-2006, 01:19 PM
#10
3.0 BAR
Join Date: May 2006
Posts: 1,967
Re: crx exhaust
I put one of those TSUDO Exhausts on my 98 civic coupe. I sounds great. not ricey just low, deep, and smooth (with out the adjustable silencer ofcourse). Just make sure you get a badged one or make sure it's an authentic TSUDO one. I bought one from one seller and it didn't have any badges or anything and it didn't fit worth a ----. The axel back flange was fucked up and crooked. I think it was a second or a return they sent me or something. The box wasn't even labeled "TSUDO", it was just a plain cardboard box. So I had them pick it up with a call tag and asked for a real one. The new one with the badges fit great and it sounds great too.
