crx exhaust
 

will all 88-91 crx exhaust system fit each other cause i was looking at this

http://cgi.ebay.com/ebaymotors/TSUDO...07800370QQrdZ1

and it says this exhaust will not fit the HF models. do they mean HF as in civic or the CRX HF models. if its the CRX models how do i know if i have an HF i know i dont have an SI.

Re: crx exhaust
 

I have that fine piece of chinese swag on my car right now. It fits good. You will know if you have an HF because it will say HF on the back of your car. Other than that open you hood.

Re: crx exhaust
 

if its MPFI and not an SI its an HF, if its DPI its an STD. you would most likely know if it where an HF, so i would say you probably have the STD model. thats a descent catback and should work fine on the SI, i dont believe it will bolt straight up to the HF or STD though.

Re: crx exhaust
 

the problem is i bought the car as a shell and it doesnt have anything on the back of the car to know witch model it is. its a 91 crx the eigne harness is still there. it has two injectors but someone wired it for four if that helps.
if i bought the exhaust how bad would the fitment be and what part of the exhaust is different.

Re: crx exhaust
 

how does it sound. it not loud right

Re: crx exhaust
 

The reason it says "won't fit hf models" is because the hf's have the cat right after those nice turbo manifolds ;) If it's just a shell you have nothing to worry about...it'll fit just fine ;)

Re: crx exhaust
 

thats what i wanted to hear thanks alot. going to buy it real soon

Re: crx exhaust
 

+1 you will need a factory D16a6 cat though. unless its getting boosted and a custom downpipe is getting made.

Re: crx exhaust
 

i was planing on putting a b18a in i

Re: crx exhaust
 

I put one of those TSUDO Exhausts on my 98 civic coupe. I sounds great. not ricey just low, deep, and smooth (with out the adjustable silencer ofcourse). Just make sure you get a badged one or make sure it's an authentic TSUDO one. I bought one from one seller and it didn't have any badges or anything and it didn't fit worth a ----. The axel back flange was fucked up and crooked. I think it was a second or a return they sent me or something. The box wasn't even labeled "TSUDO", it was just a plain cardboard box. So I had them pick it up with a call tag and asked for a real one. The new one with the badges fit great and it sounds great too.