|
Re: Crank Pulley Removal Problems
Soak the bolt for a day or two with PB Blaster. Accept NO substitues.
Then use a single, long socket and a 3' breaker/socket bar.. No socket extensions or cheater bars. The more extensions or cheaters you use, the more everything will flex and bend. You don't want that. Get it set up all nice and tight so the breaker bar sticks out the front of your car and then kick it REALLY ------- hard. It'll take a few tries, but you will not get it off any other way manually. You need a good jolt to get it started. Trust me, this is coming from a guy who used to spend 3 days trying to get those ------- things off. No amount of leverage or long bars would get it started. I broke 3 or 4 sockets & extensions that way. |
Re: Crank Pulley Removal Problems
Originally Posted by b204dr
if the motor is in the car you could put it in gear and have some one hold the breaks some times this works O0
200ft/lbs is a bid-nite :P |
Re: Crank Pulley Removal Problems
what about a long bar maybe a breaker bar just cross ways through the lugs on the hub? if its slanted to the ground and at good angle its not gonna move and you should get them off, but ---- ya try the brake thing, never done that b4.
|
Re: Crank Pulley Removal Problems
Originally Posted by Mista Bone
|
Re: Crank Pulley Removal Problems
Originally Posted by EG6Sleeper
Originally Posted by Mista Bone
|
Re: Crank Pulley Removal Problems
and its missing the exhaust, and cover
|
Re: Crank Pulley Removal Problems
haha. i already taken the exhaust manifold and oil pan out already.
I wonder what kind of metal is that from. I been searching through my tool box and throughout the house. And i cant find anything close to that metal he is using to bolt the flywheel to the tranny. Hmmmm.... Any ideas? |
Re: Crank Pulley Removal Problems
LOL... I don't think you need the exact same thing.
|
Re: Crank Pulley Removal Problems
check out that hybrid honda forum, thats where that pic is from
|
Re: Crank Pulley Removal Problems
ok i use a 13 mm wrech and just bolt it to the flywheel and the tranny. And i use a breaker bar. Finally came loose. ------- ----.
|
| All times are GMT -5. The time now is 07:23 PM. |
© 2024 MH Sub I, LLC dba Internet Brands