codes...
09-16-2005, 05:09 PM
#1
1.5 BAR
Thread Starter
Join Date: Oct 2004
Posts: 907
codes...
will any of these be the problem why vtec wont work? my guess is the knock sensor.
1:Oxygen sensor
23:Knock sensor
8:TDC sensor
and dose anyone know where the knock sensor would plug into in the back.. we took a radum guess because the plug looked right and the wire color.
1:Oxygen sensor
23:Knock sensor
8:TDC sensor
and dose anyone know where the knock sensor would plug into in the back.. we took a radum guess because the plug looked right and the wire color.
09-16-2005, 10:36 PM
#2
3.0 BAR
Join Date: Aug 2003
Location: NE-PA
Posts: 4,666
Re: codes...
Yes, yes and, well...probably. Knock sensor is in the back of the block, have fun gettin your hands back there 
As for the other codes, well...sounds like you got issues. Check and make sure that you don't need 2 O2 sensors too. TDC could be a dizzy problem, or the wires are backwards.
As for the other codes, well...sounds like you got issues. Check and make sure that you don't need 2 O2 sensors too. TDC could be a dizzy problem, or the wires are backwards.
Thread
Thread Starter
Forum
Replies
Last Post
