HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   clutch problem, hybrid D drivetrain (https://www.homemadeturbo.com/hybrid-tech-8/clutch-problem-hybrid-d-drivetrain-9396/)

89dxhunchback 09-04-2003 09:31 PM

clutch problem, hybrid D drivetrain
 
I swapped a D16Z6 into my hatch, and now the tranny that worked for the past year isn't working right.
The tranny is a 89' DX tranny that came with the car. I used the 93' flywheel and clutch stuff.
I can put it in any gear and let off the clutch and the car doesn't move, the rpms only drop like 200rpm max. I reused the throw-out bearing from the D15b2.. I already tried adjusting the clutch cable in about 10 different places and now I dropped the tranny, but don't know what to look for, I'm a engine/turbo crazy mofo, but the little things I'm still learning on.

Any comments on possable cause or what to check would be great.

alwaystootall 09-04-2003 09:54 PM

Re:clutch problem, hybrid D drivetrain
 
88 clutch diff from 89,89 diff from 90+(pritty shure) the 90+ flywheel clutch is bigger than 89 use the same clutch and flwheel for the tranny u are using











shortyz 09-04-2003 11:28 PM

Re:clutch problem, hybrid D drivetrain
 
if you used the clutch bigger then the flywheel that could be the reason, and your in for another clutch disk :)

the trani went on fine? like theres no gap between engine and tranny?

89dxhunchback 09-04-2003 11:36 PM

Re:clutch problem, hybrid D drivetrain
 
yea the tranny bolted right up fine.
I thought you were supposed to match the clutch/presure plate with the flywheel that you use, not the tranny. Is that right ?

88crxSi 09-05-2003 07:34 AM

Re:clutch problem, hybrid D drivetrain
 
the 90+ clutch has a larger diameter then the 89 flywheel.

89dxhunchback 09-05-2003 02:14 PM

Re:clutch problem, hybrid D drivetrain
 

Originally Posted by crx88Si
the 90+ clutch has a larger diameter then the 89 flywheel.

I used the 93' flywheel that came on the motor with the 93' clutch/presure plate.

alwaystootall 09-05-2003 08:51 PM

Re:clutch problem, hybrid D drivetrain
 
the splines on the clutch disk and the output shaft lined up perfect ????

89dxhunchback 09-05-2003 10:54 PM

Re:clutch problem, hybrid D drivetrain
 
I'm guess they are pretty close to perfect, the inputshaft when right into the motor...

davcivic 09-10-2003 09:49 AM

Re:clutch problem, hybrid D drivetrain
 
I had the same problem with my 88 dx hatch and a 95 SOHC Vtec ZC i used, Had to use the stock dx flywheel and clutch on the transmission. But in my case the tranny would not even go in to the block, so after I changed the parts in went right in perfect.

Semnos 09-10-2003 09:57 AM

Re:clutch problem, hybrid D drivetrain
 
Hmm I guess you have another problem, cause with the '93 flywheel and '93 clutch it should work...open the tranny and look for broken stuff hehe..


All times are GMT -5. The time now is 05:21 PM.


© 2024 MH Sub I, LLC dba Internet Brands