i changed the whole set up but the pedal keep falling. like the clutch is grabing so fast. the clutch is one year old its a act street clutch and change the clutch master cylinder and slave cylinder even changed new lines and added a custom steal braid clutch line section in. but the pedal keeps falling..i'm out of adjustment on the pedal pin too. it use to engage far back where i want it but every month or so it engage closer and closer till i cant even shift. i have no leaks so i dont know what cant it be.. the clutch is one year old only though. any suggestions will help b4 i open the tranny cause i'm not planning on opening the tranny until maybe the end of the semester. anything i can do beside opening the tranny will help. or to know the exact problem is even better. thank you

 

rip open the rubber slave cylinder cover and see if the shift forks fucked.
the EXACT same ---- happend to me and here it is:







good luck and hopefully this is not your case.
BTW i found that teh guy who put the clutch in b4 it fucked up did not use any grease on the fork .

 

Dont take apart ur transmission.. Pedal slippage should not be from your clutch, Check Both your cylinders very thoroughly. You might not see the leaks on the outside.. it may be an internal leak definately bleed the system