CHECK HERE FOR INTEREST IN H SERIES HARDENED STRAIGHT CUT GEARSETS!!!!
02-20-2008, 04:44 PM
#11
3.0 BAR
Thread Starter
Join Date: Mar 2006
Posts: 5,631
Re: CHECK HERE FOR INTEREST IN H SERIES HARDENED STRAIGHT CUT GEARSETS!!!!
Ill take the day before the local HT meet... Its ALWAYS broke for ---- like that.. LOL...
HAVE to take my dad for a ride with it at 620+ though....
So... the odds are better right away that ill break it... then they will fall, as will the boost; dramatically...
pout.
GAY
The good news is it looks like Mfactory is going to come through andf do the set... longer first, stock second, strasight cut hardened 3 and four.
In addidtion, FD and shafts will be sent out for heat treat. as well
HAVE to take my dad for a ride with it at 620+ though....
So... the odds are better right away that ill break it... then they will fall, as will the boost; dramatically...
pout.
GAY
The good news is it looks like Mfactory is going to come through andf do the set... longer first, stock second, strasight cut hardened 3 and four.
In addidtion, FD and shafts will be sent out for heat treat. as well
02-21-2008, 03:00 AM
#14
3.0 BAR
Thread Starter
Join Date: Mar 2006
Posts: 5,631
Re: CHECK HERE FOR INTEREST IN H SERIES HARDENED STRAIGHT CUT GEARSETS!!!!
I know its the load of the weight resisting the motors torque... I believe the tires are not going to help matters at all either... I want to quit it sometimes but the car is like a hot chick that cooks you breakfast after taking it in the *** all night long (with her sister).
There are other ways to go fast... BUt doing what this thing does to ---- youd never expect to lose is ------- priceless....
There are other ways to go fast... BUt doing what this thing does to ---- youd never expect to lose is ------- priceless....
02-22-2008, 04:15 AM
#17
3.0 BAR
Thread Starter
Join Date: Mar 2006
Posts: 5,631
Re: CHECK HERE FOR INTEREST IN H SERIES HARDENED STRAIGHT CUT GEARSETS!!!!
1200 ish for 3 and 4..... more if they do a shaft/ 2nd solution.... Waithing toi hear... I think weve got enough interest to get them going if most people cough up the deposit... Ill know more by Monday, im supposed to talk yto them this weekend
spiker
02-22-2008, 03:02 PM
#19
3.0 BAR
Thread Starter
Join Date: Mar 2006
Posts: 5,631
Re: CHECK HERE FOR INTEREST IN H SERIES HARDENED STRAIGHT CUT GEARSETS!!!!
Well... i just got off the phone with Guilluame at M factory...
I offered my last M2Y4 tranny for all the measurements and such they need, but it turned out that they have a H22 tranny laying around they forgot about they can send to the engineers for R n D so Im off the hook... Its a M2F4 so there is a different tooth count for 1st, but they are aware of it, and are pursuing putting a gearset out as we speak...
The Gearset is officially under development....
YES!!!!!!!!!!!!!!!!!!!!!!!
3-6 months probably... Ill keep yall nigs informed.
I offered my last M2Y4 tranny for all the measurements and such they need, but it turned out that they have a H22 tranny laying around they forgot about they can send to the engineers for R n D so Im off the hook... Its a M2F4 so there is a different tooth count for 1st, but they are aware of it, and are pursuing putting a gearset out as we speak...
The Gearset is officially under development....
YES!!!!!!!!!!!!!!!!!!!!!!!
3-6 months probably... Ill keep yall nigs informed.
Thread
Thread Starter
Forum
Replies
Last Post
lock-pop!
General Discussion
35
04-11-2008 01:31 PM
bigdaddyvtec
Hybrid/Tech
11
03-17-2008 01:49 AM
Scottsi
Hybrid/Tech
4
12-12-2004 07:19 PM
