Re: CEL code help in EG
 

i know in the helms or the hanes ( not sure which one) they have the firing order wrong. confused the ---- out of me and my friend for a while till we switched it around.

Re: CEL code help in EG
 

well its starting. I think i got the firing order right.. if you guys think its the firing order, any one have a FOR SURE idea of the firing order on a Z6??

Re: CEL code help in EG
 

Any ideaS??

Re: CEL code help in EG
 

themostat ground? :S

Re: CEL code help in EG
 

grounded. Tranny grounded, as well as the head grounded by the drivers headlight

anything else?

well i did a test tonight. Thought it was the plug wires becuase I didn't buy them new. had the car running, started pulling wires one at a time. Cyl 1 and 2 both made the car die. Cyl 3 and 4 didnt make any affects. SO, i went and got ym DX wires ( not sure if that will work or if there is a difference?? - can someone clarify that?? ) and 3rd and 4th cylinder STILL did not make any difference. Would it be something else? The spark plugs are for sure brand new and there is no need to gap these, and I know hte injectors are good cuz i used the DX manifold on this cuz some of the sensors were broken.

still need Help!!

Re: CEL code help in EG
 

ok well i pulled my spark plugs ( remember they are brand new ) so the cyl 1 and 2 they plugs were filled with blackness. thats cool. now, to cyl 3 and 4, completely Clean! like as if i just put them in there and didn't run the car. So it isn't getting any spark in those cylinders?? I smelled the plugs, n it smells like there is fuel going into the cylinders, so I think im getting air, fuel, and half spark to my knowledge. Any insight on this?? would it still be my plug wires??

Re: CEL code help in EG
 

I'm being told its the Coil packs?? Any idea how to check or if i can replace them myself? any how-to's or diagrams?

Re: CEL code help in EG
 

There's AN ignition coil in your distributor. Download the shop manual from a sticky at the top of this forum, it tells you how to test it and anything else you need to fix.

Re: CEL code help in EG
 

ok got brand new wires. still same problem. Now, as i get out of the car after its run, I get out and touch the door i get a shock... Is there something that I am missing here? A possible ground maybe? how many are there? I count 3 so far, is there something that I'm missing if my car creates a current?? but for sure i get a shock, happened already 3 times in a row.

Re: CEL code help in EG
 

Download the shop manual.