Castle nut is stripped... please HELP!
08-01-2005, 02:17 AM
#11
Administrator
Join Date: Dec 2002
Posts: 13,991
Re: Castle nut is stripped... please HELP!
Large vise grips and a 12x1.25 dye
Clean up the threads, use a new nut (if the threads are fucked) and dont forget to use a new cotter pin. I get cars all the time that kids mushroom the ---- out of balljoints.
Clean up the threads, use a new nut (if the threads are fucked) and dont forget to use a new cotter pin. I get cars all the time that kids mushroom the ---- out of balljoints.
08-01-2005, 07:07 AM
#12
0.0 BAR
Join Date: Feb 2005
Posts: 0
Re: Castle nut is stripped... please HELP!
Originally Posted by AbaZ
Large vise grips and a 12x1.25 dye
Clean up the threads, use a new nut (if the threads are fucked) and dont forget to use a new cotter pin. I get cars all the time that kids mushroom the ---- out of balljoints.
Clean up the threads, use a new nut (if the threads are fucked) and dont forget to use a new cotter pin. I get cars all the time that kids mushroom the ---- out of balljoints.
08-01-2005, 09:20 AM
#13
0.5 BAR
Join Date: Feb 2004
Posts: 198
Re: Castle nut is stripped... please HELP!
Originally Posted by 45psi
yea Jago, please please pony up the $34 for the ball joint and get a new castle nut. the ball joint comes out with some finese with a hammer after you take out the snapring.
I stripped a castlenut once and couldnt get it tight enough to put the safety pin through. the result my car losing control, veering across 2 lanes of traffic and me hitting a 19 y/o kid off his motorized scooter. the scooter was toast, but he was ok because he flew over the sidewalk and landed in grass. my control arm had hit the pavement, carving a nice groove, and the drivers side tire was tucked nicely into the wheel well. dont half *** your suspension, it will save your life and money.
I stripped a castlenut once and couldnt get it tight enough to put the safety pin through. the result my car losing control, veering across 2 lanes of traffic and me hitting a 19 y/o kid off his motorized scooter. the scooter was toast, but he was ok because he flew over the sidewalk and landed in grass. my control arm had hit the pavement, carving a nice groove, and the drivers side tire was tucked nicely into the wheel well. dont half *** your suspension, it will save your life and money.
yea, definatly dont half *** this. i was racing a friend at over 120 last year, and as soon as we came to a stop i tried to switch lanes and the drivers side of my car hit the ground. castle nut came off, tire up in the wheelwell, broke 2 of 3 bearings on my inner cv joint. it was a mess. and im very very lucky it didnt happen 2 minutes earlier.
08-01-2005, 03:10 PM
#17
Guest
Posts: n/a
Re: Castle nut is stripped... please HELP!
Well I got that little ****** off.
Pipe wrenches ------ own
I have never encountered such a bitch of a castle nut in my life, even after a few full turns it was still just as hard to turn the entire way until it was off. My threads look ok so I should be able to keep the balljoint in there.
Thanks again for your input everybody, I really appreciate it.
Pipe wrenches ------ own
I have never encountered such a bitch of a castle nut in my life, even after a few full turns it was still just as hard to turn the entire way until it was off. My threads look ok so I should be able to keep the balljoint in there.
Thanks again for your input everybody, I really appreciate it.
Thread
Thread Starter
Forum
Replies
Last Post
2G6
General Discussion
11
04-22-2009 06:25 PM
alfaaay
General Discussion
6
08-26-2005 07:24 PM
