brucehunglo

95 ex coupe w/ a d16y8 swap 450dsm injectors w/ resistor box and uberdata management.

for some weird reason the car is bogging horribly and giving me cell 9 (cylinder sensor i think its called). now i have already replaced the dist. for the 2nd time since the swap has been in the car(using a DX dist) and after the 2nd time the car ran perfectly for like 3-4 weeks no problems now it just suddenly appears again. b4 when this code would pop up i could just turn off the car and the problem would dissappear but now it keeps solid and feels like it is misfiring any time the car gets into the revs past 2500 rpms. if its not the dist then how could i fix it? the harness is the original harness from the car. i have heard from someone that they had this problem and how he fixed it was to run the wire from the dist for the cyp to the ecu but what pin do i pin it to then if this is troo. can someone help me i searched and all the answers were completely bogus answers.

thanks
cliff

Guy-Fast

wiring. Buy a chiltons the thick one will have all the pinouts and ohm readings and full walk through of how to trouble shoot wiring. If you arent wiring skilled I recommend havin a shop fix it has it wont cost much has they most likely just have to run a new pin at the dist and directly to the ecu. Its simple but if you know nothin about wiring well its not