Which cam should i use??
08-12-2004, 10:54 PM
#11
1.0 BAR
Thread Starter
Join Date: May 2004
Posts: 439
Re:Which cam should i use??
Originally Posted by AbaZ
any big differences between z6 and y8 cams?
I thought that the d15b was 3 stage vtec? would it fit the y8? Im sort of new to engine building my friend is helping me.
08-13-2004, 12:22 AM
#14
0.0 BAR
Join Date: Feb 2003
Posts: 0
Re:Which cam should i use??
I broke my cam during my engine tear down. (don't ask) I was searching for a stock cam and considered a z6 (seemed more available). I read that the z6 cam slightly off on the timing mark. I believe it's 2 degrees, but I can't remember which way. I say you keep yourself out of harms way and get a y8. Less potential problems down the line.
08-13-2004, 12:24 AM
#15
1.0 BAR
Thread Starter
Join Date: May 2004
Posts: 439
Re:Which cam should i use??
Ok the head already has a y8 in it since that what it is, but i thought since im rebuilding i might as well do it why its out! Humm im undecided what to do yet! lol I got about a week to decide
08-13-2004, 11:32 AM
#18
3.0 BAR
Join Date: Feb 2003
Posts: 9,089
Re:Which cam should i use??
Originally Posted by AbaZ
You can use a OBD2 or OBD1 intake manifold in your OBD0 Car, just swap out the injectors... and thats it! 
Idle Air control valve
Intake Air Temp
Sensors are the same, and you can use the newer style throttle body too and just use the map sensor on the tbody.
Jeff
Idle Air control valve
Intake Air Temp
Sensors are the same, and you can use the newer style throttle body too and just use the map sensor on the tbody.
Jeff
08-13-2004, 11:34 AM
#19
1.0 BAR
Thread Starter
Join Date: May 2004
Posts: 439
Re:Which cam should i use??
Do they have the little holes?? Yes ive heard they are a pain!!! Im going to be using my A6 si manifold, since i dont have another one, i have a Y7 with the throttle body horizontal!! The A6 should flow good enough?
