|
Re: cam caps on B-series heads....they interchangable?
Originally Posted by AbaZ
I cant see it being a problem, since cams are interchangeable no problems, and there is no cam journal to cam cap clearences, I'd say its fine.
I would try to stick with the same series head though. standard .05-.10mm service limit .15mm |
Re: cam caps on B-series heads....they interchangable?
milled .002" off the cap and head, bore out to 35mm, typical align bore and hone.........
Just like you do on V8 bottom ends, esp. when adding 4 bolt splayed main caps on the center 3 mains.......... If your really picky, you'll do the bore/hone with the heads or torque plates installed to simulate the stress the block sees..... |
Re: cam caps on B-series heads....they interchangable?
Originally Posted by Mista Bone
milled .002" off the cap and head, bore out to 35mm, typical align bore and hone.........
Just like you do on V8 bottom ends, esp. when adding 4 bolt splayed main caps on the center 3 mains.......... If your really picky, you'll do the bore/hone with the heads or torque plates installed to simulate the stress the block sees..... no matter, it wlil still be way more $$ to fix that head than to buy a good one. |
Re: cam caps on B-series heads....they interchangable?
I have swaped them a few times, and about 80% of the time, they will not work.. but 2 times i have had them actually line up, i say good luck!
|
Re: cam caps on B-series heads....they interchangable?
Originally Posted by turbohf
some guy is tring to sell me a head, but it doesnt have any cam caps, or rockers.... i know the rockers are fine from another head, but im under the impression that the cap caps are machined with the head. is that true???
|
Re: cam caps on B-series heads....they interchangable?
yes of course it is, i usually only deal with local people on trasactions of used parts, i want to see them first to garrentee the condition of them... and i cant even remember who the hell i was gonna buy that head from, probly someone off of NWSR....
|
Re: cam caps on B-series heads....they interchangable?
B16 and B18(VTEC models) are interchangable. but not non-vtec->Vtec, Vtec->non-vtec
|
Re: cam caps on B-series heads....they interchangable?
NOT interchangeable unless speced..........
please folk.........each head is different, yes you can get lucky with normal tolerances...........but the one time it is tight, wipes away the oil, locks a cam and 3-4 valve heads take out 4 pistons.......... was it really ------- worth it????????????? |
Re: cam caps on B-series heads....they interchangable?
Why don't you just listen to Mist Bone, He knows what he's talking about. Think about it, it only makes sense!
|
Re: cam caps on B-series heads....they interchangable?
I personally would not do it. Cam caps are head specific, just like the crank main caps are.
|
| All times are GMT -5. The time now is 07:15 AM. |
© 2024 MH Sub I, LLC dba Internet Brands