HomemadeTurbo - DIY Turbo Forum

Hybrid/Tech B16 / B18 / ZC / D16 / H22 / Mini-Me Ask your Honda Engine Questions here.

cable transmission on hydraulic system

Thread Tools
 
Search this Thread
 
Old 02-22-2009, 10:42 AM
  #1  
3.0 BAR
Thread Starter
 
rudebwoy's Avatar
 
Join Date: Mar 2003
Posts: 4,217
Default cable transmission on hydraulic system
I need a new transmission, and I came accross a b16 cable one, my system is hydraulic, what would I need to use this transmission, would I be able to use the same clutch? does anyone (hassport) sells a kit to make this happen? will I be able to use the same LSD ?
rudebwoy is offline  
Reply
Old 02-22-2009, 02:05 PM
  #2  
89hatchsir
Guest
 
Posts: n/a
Default Re: cable transmission on hydraulic system
There are two different cable b16 trannies. Small shaft and big. The spline that the clutch slides on will tell you which one it is. If it is the big spline, it should work with your current clutch setup.

You could probably convert your pedal-rack to a cable setup pretty easy. Go to the junkyard and get one off a ef. Then you'd need a clutch cable from an da integra. Civic ones are too short.

I couldn't tell you which lsd's are interchangeable. Sorry
 
Reply
Old 02-22-2009, 03:16 PM
  #3  
0.0 BAR
 
nascarfan's Avatar
 
Join Date: Oct 2007
Posts: 0
Default Re: cable transmission on hydraulic system
i have an ys1 in my 94 civic, via hasport conversion, its ok but i wish i had the tiime to do a full cable conversion
nascarfan is offline  
Reply
Old 04-04-2009, 04:30 PM
  #4  
3.0 BAR
Thread Starter
 
rudebwoy's Avatar
 
Join Date: Mar 2003
Posts: 4,217
Default
next question is which throwout bearing would I use if I keep the clutch from the hdraulic system and use the cable tranny?
rudebwoy is offline  
Reply
Old 04-05-2009, 01:09 PM
  #5  
0.0 BAR
 
r_senik's Avatar
 
Join Date: Jan 2006
Posts: 25
Default
good question...would like to know also...
r_senik is offline  
Reply
Old 04-05-2009, 02:34 PM
  #6  
0.5 BAR
 
i_heart_my_ef's Avatar
 
Join Date: Mar 2009
Posts: 92
Default
Well I have a s1 tranny in my ef with a cable throw out bearing and hydro pp and flywheel thm the disk is for a cable and it all works fine
i_heart_my_ef is offline  
Reply
Old 04-06-2009, 03:07 AM
  #7  
3.0 BAR
Thread Starter
 
rudebwoy's Avatar
 
Join Date: Mar 2003
Posts: 4,217
Default
ok thanks ! kind of answer I was looking for, but is it a B SERIES MOTOR?
rudebwoy is offline  
Reply
Old 04-06-2009, 04:18 PM
  #8  
0.5 BAR
 
i_heart_my_ef's Avatar
 
Join Date: Mar 2009
Posts: 92
Default
Yeah b16a
i_heart_my_ef is offline  
Reply
Old 04-06-2009, 09:20 PM
  #9  
0.5 BAR
 
redlinevtec's Avatar
 
Join Date: Jun 2008
Posts: 50
Default
hasport makes a kit for this
redlinevtec is offline  
Reply
Old 04-07-2009, 02:41 PM
  #10  
3.0 BAR
Thread Starter
 
rudebwoy's Avatar
 
Join Date: Mar 2003
Posts: 4,217
Default
I ordered the kit yesterday, then had to cancel the order, I guess I am stuck with the LS tranny. I hate these long gears.
rudebwoy is offline  
Reply



Advanced Search
Quick Reply: cable transmission on hydraulic system


Reply Closed Thread Share

All times are GMT -5. The time now is 06:30 PM.