bsurge

im swapping a B20b into an 91 integra and a couple things are holding me up.....ive had to swap crankpully`s, mounts intake and exhaust manifolds andthe thermostat housing the re wire the fan switch.

WTF do i do about the black carbon canister thats under the intake manifold? the B18a runs it stock in the integra but the B20 doesnt. 1 hose runs from the block into canister, the other runs out and up to the PCV valve.theres a big hole going right into the back of the B18a block when u remove the canister. how do i re-route these hoses since there is no where to put the canister on the B20B?? lots of motors dont run that canister but lots do?? what exactly is the purpose of it since lots of cars dont run one.

zex_cool

oil catch can.

bsurge

how should i re-route the hoses to eliminate it?

zex_cool

jst make a oil catch can.

like this;
http://www.honda-tech.com/zerothread?id=1674798

bsurge

thanks.. i just need to know also where to run the line that was coming from the block into the can from ??
on the b18a the line comes form the block.... on the b20 theres nothing on the block to connect this hose to..