b18c-R in an LS
#1
b18c-R in an LS
hey guys
I have recently swaped a obd2 96 b18c-R into my obd1 94 integra LS. The reson for obd2 engine is because it was originally bought for a obd2 99 gsr sedan with no engine.
This is my first engine swap, I was confident in all the mechanical stuff because the engines are basically the same except wiring. My friend told me that if I was to do the swap he would be able to do the wiring for me. The engine is in and everthing is hooked including the wiring.
When I check for cel codes it is just constant light and when i try and start it up it turns over but does not fire. I was wondering if anbody has any wiring info so i could check me friends work, or possibly send it out to hasport.
thanks in advance
I have recently swaped a obd2 96 b18c-R into my obd1 94 integra LS. The reson for obd2 engine is because it was originally bought for a obd2 99 gsr sedan with no engine.
This is my first engine swap, I was confident in all the mechanical stuff because the engines are basically the same except wiring. My friend told me that if I was to do the swap he would be able to do the wiring for me. The engine is in and everthing is hooked including the wiring.
When I check for cel codes it is just constant light and when i try and start it up it turns over but does not fire. I was wondering if anbody has any wiring info so i could check me friends work, or possibly send it out to hasport.
thanks in advance
#5
Re:b18c-R in an LS
Originally Posted by Turbo90Accord4DR
where do yo ulive?
#7
Re:b18c-R in an LS
all you have to do is use your obd1 injectors and obd1 dizzy on the new engine, everything else plug right up, except for the vtec since your ls didn't have vtec. you'll need a p72 ecu at least to get it running right and run wires for vtec to the ecu pins.
#8
Re:b18c-R in an LS
Im not following the "CEL is solid, not blinking"
This is after you jump the plug correct?
Sorry if its a douchebag question but i want to make sure youre checking the code right. If you checked the grounds and the ecu isnt throwing an actual code, just a solid, try another ecu. The only times ive heard of a solid CEL have been grounds or bad ecu.
Elaborate a bit more alos, that may help get better info from us.
This is after you jump the plug correct?
Sorry if its a douchebag question but i want to make sure youre checking the code right. If you checked the grounds and the ecu isnt throwing an actual code, just a solid, try another ecu. The only times ive heard of a solid CEL have been grounds or bad ecu.
Elaborate a bit more alos, that may help get better info from us.
#10
Re:b18c-R in an LS
I got the injectors swapped over from the LS but when I went to swap the dizzy it dont fit because one of the flanges is right where the vtec soliniod is. Do you suggest cutting the flange or purchasing a type r or grs dizzy that would fit with the vtec soli.
I also noticed that the plugs do not match up the power and the signal are together on the harness but separate on the obd1 dizzy.
I also noticed that the plugs do not match up the power and the signal are together on the harness but separate on the obd1 dizzy.