B18B into Ek hatch
#1
B18B into Ek hatch
I did a litille searchin and didnt find anything
anyways my tranny is goin out on the D16Y7 and there is a local guy with a B18B for sale
If I get the motor , tranny what else is needed?
mounts from the donor car or do ya have to buy hasport
also what axles
just nto sure what all i need
anyways my tranny is goin out on the D16Y7 and there is a local guy with a B18B for sale
If I get the motor , tranny what else is needed?
mounts from the donor car or do ya have to buy hasport
also what axles
just nto sure what all i need
#3
Re: B18B into Ek hatch
Also need and integra cat if you want the exhaust to bolt right up. Everything else just takes a little tweaking such as fuel lines and throttle cables. Be prepared to break that driver side liquid mount after a few months too. I just cracked mine and it squirted oily crap everywhere.
#4
#8
Re: B18B into Ek hatch
ok I have swaped my car to a ls/vtec and I know that you can use the stock drivers side mount works fine you just have to turn it to line up with the holes I used the stock ruber mount from the y7 on the timing belt worked fine and still has not broke or anyting. you need a 99-00 civic si front tranny mount a 99-00 civic si rear trany bracket and either 94-00 teg shiftlinkage or 99-00 civic si linkeage delsol stuff won't work. other stuff that is handy 90+ teg throttle cable,make sure you have the a/c bracket off the b18b this is your frong drivers lower engnie mount. I used 94+ teg axels 99-00 civic si axles DO NOT WORK they are to long. ecu and wiring harness from the teg but with a little rigging it up you can use your 97 d16y7 stuff I did for a little while not suggest but if nessary will work out ok. well thats about all I can think of right now enjoy it.
Thread
Thread Starter
Forum
Replies
Last Post