B18B into Ek hatch
 

I did a litille searchin and didnt find anything

anyways my tranny is goin out on the D16Y7 and there is a local guy with a B18B for sale

If I get the motor , tranny what else is needed?

mounts from the donor car or do ya have to buy hasport

also what axles

just nto sure what all i need

Re: B18B into Ek hatch
 

you need an si driver mount si t bracket the b axels and shiftlinkage that should do it

Re: B18B into Ek hatch
 

Also need and integra cat if you want the exhaust to bolt right up. Everything else just takes a little tweaking such as fuel lines and throttle cables. Be prepared to break that driver side liquid mount after a few months too. I just cracked mine and it squirted oily crap everywhere.

Re: B18B into Ek hatch
 

this?

http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW

Re: B18B into Ek hatch
 

Yeh thats the driverside mount, you still need the si t bracket

Re: B18B into Ek hatch
 

Im about to buy these? will this mount my engine and everything in?

also any probs with keeping ac?

Re: B18B into Ek hatch
 

axles, shift linkage, tranny, mounts, motor, ecu, wiring harness

Re: B18B into Ek hatch
 

ok I have swaped my car to a ls/vtec and I know that you can use the stock drivers side mount works fine you just have to turn it to line up with the holes I used the stock ruber mount from the y7 on the timing belt worked fine and still has not broke or anyting. you need a 99-00 civic si front tranny mount a 99-00 civic si rear trany bracket and either 94-00 teg shiftlinkage or 99-00 civic si linkeage delsol stuff won't work. other stuff that is handy 90+ teg throttle cable,make sure you have the a/c bracket off the b18b this is your frong drivers lower engnie mount. I used 94+ teg axels 99-00 civic si axles DO NOT WORK they are to long. ecu and wiring harness from the teg but with a little rigging it up you can use your 97 d16y7 stuff I did for a little while not suggest but if nessary will work out ok. well thats about all I can think of right now enjoy it.