ok i have a 92 ls swap (obd1) b18a1 motor and cable trans, pr4 ecu
going in a 1994 civic dx

from searching this is what ive gathered:

b18a1 axles

hasport cable to hydro conversion

DC integra linkage

DC integra rear tranny mount

DC integra cam gear side mount + engine bracket

hydro vss from my current tranny

any b-series throttle cable

civic harness

is this all correct? i hope so because the swap will begin in the next few weeks.

what about radiator hoses? can i use my stock civic ones?

 

you need b series knuckles
the upper hose if from the ls motor and the lower is from the 94-97dohc del sol (and others but I dont know which ones)

 

knuckles? i thought you only need to swap those in certain EF's when doing the swap? i have a 94 and heard nothing about that, although i still am not sure what i exactly need. everything else above is correct?

 

jago to the rescue again. got a little nervous for a second there haha.

 

i'm pretty sure that hasport is only cable to hydro convertion. not the other way around. meening you use it to put a hydro tranny into cable tranny car not vice versa

 

http://hasport.com/shop/product_info...products_id=95

tuner toys also sells one.

 

well ----...I used 94-00 teg knuckles on mine...because I thought b and d axles were different splines in the hubs...
I guess all I did was upgrade to better brakes