Go Back  HomemadeTurbo - DIY Turbo Forum > Homemadeturbo > Hybrid/Tech
Correct me If i am wrong.D16 into a ef. Help! >

Correct me If i am wrong.D16 into a ef. Help!

Hybrid/Tech B16 / B18 / ZC / D16 / H22 / Mini-Me Ask your Honda Engine Questions here.

Correct me If i am wrong.D16 into a ef. Help!

Old 09-22-2010, 02:23 AM
  #1  
0.0 BAR
Thread Starter
 
Join Date: Sep 2010
Posts: 2
Default Correct me If i am wrong.D16 into a ef. Help!

I have done some research and just want clarification that I am on the right start. I currently own a 1990 civic standard which is a 4 speed and looking to do my first swap.

Looking to either put a d16z6 or y8 into my civic.

Parts required:
Engine:d16z6 or y8
ECU28
Distributor: from the motor i choose to go with
Engine wiring harness: whichever engine I decide to go with, either the Z6 or y8
Extra Wiring:a conversion harness for obd0 to obd1 which can be purchased from rywire OR i could actually rewire it on my own
Extra Wiring: a conversion harness for dpfi to mpfi which can be purchased from rywire OR i could actually rewire it on my own
O2 Sensor Wire
D-series header
Motor Mounts: Hasport or reuse the mounts which come on the new engine. I will have to swap the stock driver side mount from my current engine onto the z6 for it to line up correctly.

Parts which should be replaced:
Fuel filter
Head bolts
Timing Belt
Water pump
Spark Plugs
Distributor cap and rotor
valve cover gasket
Radiator and hoses
hondata intake manifold gasket
upgraded intake manifold

Tranny:
1990-1991 si tranny OR
1992-2000 tranny with a cable to hydro clutch kit from Hasports
a complete harness from rywire.com.
Shift Linkage:depends on which tranny
Clutch and pressure plate and these parts depend on which transmission i decide to go with
Axles: which?
Flywheel: for the tranny? engine? or my car?

Engine management: VAFC? or what

Am I on the right track? what parts am i missing? what parts should I add?

What I am unsure of....................
no clue about which axles to use
no clue on if i need the resistor box on not for dpfi to mpfi
Distributor? just match the engine
Flywheel: for the tranny? engine? or my car?

all help is welcomed. Thanks!
gsroyce is offline  
Old 09-22-2010, 08:26 AM
  #2  
0.0 BAR
 
Join Date: Sep 2010
Posts: 3
Default

id just use everything on the car now the axles and flywheel are the same. Youll have to get a z6 distributor if u use a z6, or a non vtec obd1 distributor if u use a y8 and either repin or get/make a jumper harness
gsxguy1984 is offline  
Old 09-25-2010, 12:19 AM
  #3  
0.5 BAR
 
Join Date: Mar 2009
Posts: 77
Default

gsx is right, use as much as you can from the current car/motor, and mix and match with the motor you purchase, use whichever parts are in better condition, or work with your current application.
DannyAE is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
AJxr
Hybrid/Tech
7
11-17-2006 11:43 AM
ifly87
Engine Management
11
08-14-2006 09:09 AM
bmxunderground
Forced Induction
16
07-04-2003 05:00 PM
CivicSiR
Hybrid/Tech
2
03-24-2003 01:50 PM


Thread Tools
Search this Thread
Quick Reply: Correct me If i am wrong.D16 into a ef. Help!


Contact Us - Sitemap - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.