B18a1 install
02-11-2003, 08:46 PM
#1
1.0 BAR
Thread Starter
Join Date: Jan 2003
Posts: 632
B18a1 install
alright people...i bought a complete LS b18a1 swap today and i need to know what i should do to install this thing myself...speaking mainly with wiring and all....any advice would be greatly appreciated..like B series install instructions into a 91 crx hf...thank
lewis
lewis
02-11-2003, 10:45 PM
#4
1.0 BAR
Thread Starter
Join Date: Jan 2003
Posts: 632
Re:B18a1 install
alright....well...my big thing is 3 things...the motor is out of a 90-91 integra ls. so what i wanna know is will the stock motor mounts work with my 91 crx ? or do i have to get new mounts from hasport ? second thing is how do i wire the bitch up to the car? third thing is will the axles that comes with my setup just fit right in or do i need to modify them ?
these are my questions...if anyone can answer them...please do
How much for the cam gears...what brand and model # are they and what color are they ?...how much for the venom intake..whats the specs on it ?
thanks
lewis
btw. im in kansas city ks....and i bet ur 1500 miles away...it would just be cheaper for me to have the shop install it for 800 cause ill prolly end up spending more than 200 on gas...food...motel and what not.lol
these are my questions...if anyone can answer them...please do
How much for the cam gears...what brand and model # are they and what color are they ?...how much for the venom intake..whats the specs on it ?
thanks
lewis
btw. im in kansas city ks....and i bet ur 1500 miles away...it would just be cheaper for me to have the shop install it for 800 cause ill prolly end up spending more than 200 on gas...food...motel and what not.lol
02-12-2003, 01:41 AM
#5
Administrator
Join Date: Dec 2002
Posts: 13,991
Re:B18a1 install
Bring the car to us, and we will do it for 450, done in one day.. 
You can use the 90-93 axles as long as you have the integra intermediate shaft.
But since you have a HF you are kinda jacked on the axle situation, you will have to replace your hubs with 88-91 dx/si hubs in order for the b-series axles to work.
you will need a b-series mountkit
You will also need a shiftlinkage kit.
Wiring, is plug and play... Nothing special at all
Jeff
You can use the 90-93 axles as long as you have the integra intermediate shaft.
But since you have a HF you are kinda jacked on the axle situation, you will have to replace your hubs with 88-91 dx/si hubs in order for the b-series axles to work.
you will need a b-series mountkit
You will also need a shiftlinkage kit.
Wiring, is plug and play... Nothing special at all
Jeff
02-12-2003, 03:11 AM
#6
1.0 BAR
Join Date: Jan 2003
Posts: 316
Re:B18a1 install
ok im confused about axles. how much part are there to the axles? i know that theres the cv joints that hooks up the trans and axle together..then theres the intermediate shaft that goes from cv then shaft..then to the wheel?is that right? 
02-12-2003, 11:07 AM
#7
Administrator
Join Date: Dec 2002
Posts: 13,991
Re:B18a1 install
look at your motor? or go to hasports page..
you have a 3 peice setup, lh axle, rh axle and the intermediate shaft. The I shaft bolts to the engine and the shaft goes in the tranny. This makes the axles Equal length, less torque steer.
Its very simple
Jeff
you have a 3 peice setup, lh axle, rh axle and the intermediate shaft. The I shaft bolts to the engine and the shaft goes in the tranny. This makes the axles Equal length, less torque steer.
Its very simple
Jeff
02-12-2003, 11:51 AM
#8
Guest
Posts: n/a
Re:B18a1 install
the cam gears are silver obx ones and are brand new (dont know the model number off hand but theyre for an ls)..120 plus shipping, the manifold is the all polished one, it takes throttle bodies up to 66mm unless you drill it out..it was only used for a display in a shop...425 plus shipping...let me know what you want...i have pics of the manifold if you want
02-12-2003, 08:30 PM
#9
1.0 BAR
Thread Starter
Join Date: Jan 2003
Posts: 632
Re:B18a1 install
ok....now my question is this...does anyone have a shift linkage cause i dont wanna pay 150 for one from hasport....does anyone have any 88-91 dx/si hubs ??
and does anyone have b series engine mounts ??
if so..shoot me a price....engine mounts are 450 bucks from hasport and thats pricey...used ones are ok for now..in a couple months ill get new ones but for now ill go cheap on used.
lewis
and does anyone have b series engine mounts ??
if so..shoot me a price....engine mounts are 450 bucks from hasport and thats pricey...used ones are ok for now..in a couple months ill get new ones but for now ill go cheap on used.
lewis
