b16a help
#11
Re:b16a help
ok today i located the leak ive got a y21 (gsr) tranny and the leak is comming from the passenger side there is like a bolt the size of a quarter but is isnt a bolt its more like a plug and i tightened it but its still leaking it has to be turned with a square key.... anyone know what this is can anyone reccomend a sealent for it
thanks
thanks
#12
Re:b16a help
That "Square key" is your tranny oil drain, Sounds like the crush washer is bad, go to your local dealer and ask them for a tranny oil drain washer, you will have to drain/fill your trans fluid, but its more than likly what is leaking. (that square key, is also 3/8th drive)
Jeff
Jeff
#16
Re:b16a help
sorry,...the dealership recomended some "HONDABOND" anyone ever heard of it .....think it will do the trick..they said that its not the tranny oil drain the said it doesnt even serve a purpose....i unscrewed it and its just a plug some white thick fluid drained out, not much at all mabye 2 ounces and then it stopped..its located directly down from the motor mount on the pasenger side any help would be great thanks
#17
Re:b16a help
What else would it be dude? all B/D - series trannys have a 3/8th square drain plug on the bottom of the transmissions. with a crush washer, if you pulled it out, and nothing came out, you have some serious issues. You need to drain it completely and refill it (with MTF or 10-30). Throw a new crush washer/gasket after you replace the fluid.
If you think the fluid is leaking between the 2 cases, you will need to remove the trans and split the case, and use honda bond to seal it up. (very unlikly)
Jeff
If you think the fluid is leaking between the 2 cases, you will need to remove the trans and split the case, and use honda bond to seal it up. (very unlikly)
Jeff