HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   b16a help (https://www.homemadeturbo.com/hybrid-tech-8/b16a-help-4365/)

92civichb 05-01-2003 10:23 PM

Re:b16a help
 
ok today i located the leak ive got a y21 (gsr) tranny and the leak is comming from the passenger side there is like a bolt the size of a quarter but is isnt a bolt its more like a plug and i tightened it but its still leaking it has to be turned with a square key.... anyone know what this is??? can anyone reccomend a sealent for it

thanks

HMT-Admin 05-01-2003 11:56 PM

Re:b16a help
 
That "Square key" is your tranny oil drain, Sounds like the crush washer is bad, go to your local dealer and ask them for a tranny oil drain washer, you will have to drain/fill your trans fluid, but its more than likly what is leaking. (that square key, is also 3/8th drive)

Jeff

92civichb 05-02-2003 07:12 AM

Re:b16a help
 
so i can just get the tranny oil drain washer and put it around the plug????.......can i just put it on or will i have to drain and fill the tranny fluid?>??...what is crush water????


thanks a lot

92civichb 05-02-2003 07:18 AM

Re:b16a help
 
sorry i guess the crush WASHER is what i have thats leaking

92civichb 05-02-2003 11:33 PM

Re:b16a help
 
the acura dealership parts department recomended some

92civichb 05-02-2003 11:48 PM

Re:b16a help
 
sorry,...the dealership recomended some "HONDABOND" anyone ever heard of it .....think it will do the trick..they said that its not the tranny oil drain the said it doesnt even serve a purpose....i unscrewed it and its just a plug some white thick fluid drained out, not much at all mabye 2 ounces and then it stopped..its located directly down from the motor mount on the pasenger side any help would be great thanks

HMT-Admin 05-03-2003 11:27 AM

Re:b16a help
 
What else would it be dude? all B/D - series trannys have a 3/8th square drain plug on the bottom of the transmissions. with a crush washer, if you pulled it out, and nothing came out, you have some serious issues. You need to drain it completely and refill it (with MTF or 10-30). Throw a new crush washer/gasket after you replace the fluid.

If you think the fluid is leaking between the 2 cases, you will need to remove the trans and split the case, and use honda bond to seal it up. (very unlikly)

Jeff

92civichb 05-03-2003 02:11 PM

Re:b16a help
 
its on the side of the transmission right in front of my axle and there it no washer
its just a brass plug...where do i check for tranny fluid on a gsr tranny??

OnYx 05-03-2003 03:14 PM

Re:b16a help
 
wait wait, there was white fluid mixed with your oil in the tranny? that is water in your tranny if it happened that way.

HMT-Admin 05-03-2003 06:41 PM

Re:b16a help
 
You are looking at the wrong end of the tranny, that is to gain access to the sea-clip that holds the upper case in order. If its leaking on that end, it could easily be an tranny axle seal.

Jeff


All times are GMT -5. The time now is 09:35 AM.


© 2024 MH Sub I, LLC dba Internet Brands