b16a code 14/+ vafc
#1
b16a code 14/+ vafc
i just did a b16a swap into my 89 ef and i'm getting a code 14 IACV,when i unplug it the idle gets rougher,therefore it's still good, also when i accelerated the car it redlines like at 3500-4000 and won't pass that,also i'm running a VAFC,would that have an effect on it? what could cause it to rev so ruff? any one with info i would appreciate it TONS!!!!!!!!!
#4
Re: b16a code 14
code 14 means no electrical conection on the iacv
check it with a ohm meter should be aound 40 ohms or so i think if its like 600 som wack o number or nothing its fried most likely it your wires i never came across a burnt out iacv they just dont go.. they clog up and get dirty yes..
check it with a ohm meter should be aound 40 ohms or so i think if its like 600 som wack o number or nothing its fried most likely it your wires i never came across a burnt out iacv they just dont go.. they clog up and get dirty yes..
#5
Re: b16a code 14
ok thanks for the reply guys,but another question is qhat are the color wires going to the IACV for 89 ef,if anyone would happen to have that info : ),i maybe have the wrong plug in it!!!!
#7
Re: b16a code 14
Originally Posted by civic2437
what are the color wires going to the IACV for 89 ef,if anyone would happen to have that info : ),i maybe have the wrong plug in it!!!!
Thread
Thread Starter
Forum
Replies
Last Post
90turboteg
General Discussion
10
08-18-2005 09:01 AM
sohc_mshue
Engine Management
26
05-02-2005 02:48 PM