Re:B16 swap in, and it ran (past tense)
 

Put your battery in his car and see if it's causing any problems :-\

Re:B16 swap in, and it ran (past tense)
 

HOLY ----!! you still haven't got this ------ car on the road :P

Re:B16 swap in, and it ran (past tense)
 

did u align the dizzy properly? meaning the motor is at #1 TDC Comp stroke (all valves closed) and the dizzy rotor is pointing at the #1 spark plug wire??

Re:B16 swap in, and it ran (past tense)
 

the dizzy only goes in one way

Re:B16 swap in, and it ran (past tense)
 

yes I aligned it. there is no spark at all, right now the distributor is off the car for testing on my brother's b16 hatch which will happen tomarrow. It's a real bitch not having a car, I have to borrow parent's cars and that's no fun, I need a car I can beat the hell out of.

Re:B16 swap in, and it ran (past tense)
 

no, a bseries dizzy can and will go in the wrong way and bolt up. Its not good and it causes belt slipage!

Re:B16 swap in, and it ran (past tense)
 

causes belt slippage how?

Re:B16 swap in, and it ran (past tense)
 

my OBD1 dizzy off of my b18a only fit on one way, on the b18a and the b18b that i swapped it on to. the two key things (that fit into the end of the cam) were different and could only go on the cam one way??

Re:B16 swap in, and it ran (past tense)
 

who knows.. whatever. I just know that I saw it on Horsepower TV when they swapped in a gsr into that green civic. THey cut a hole in the dizzy cap and aligned the rotor and then put a new cap on.

Re:B16 swap in, and it ran (past tense)
 

hmmmmmmm....... i wonder what was the purpose of that? it seems like that would just be adjusting the timing?? i don't know though, you would think they would have a timing light on hp tv :-\