Re: b16 or LS trans for turbo ls/vtec
 

I thought that LS at 80mph was 4k
GSR at 80mph was 4.5k
and B16 at 80mph was 5k

Might just be my B16 and LS trans' though? :l

Re: b16 or LS trans for turbo ls/vtec
 

my jdm cable ys1 trans in my one crx is doing 4k at 65mph. 4k rpm @80 mph is def. a S1 LS trans. The car has stock sized tires at on the stock Si rims, so its not like I'm running a really short tire that bumps up the gear ratio. The only reason I have kept this trans in the car over using a S1 trans is the LSD. Its really annoying in traffic due to the short gearing and ur constantly shifting but then again not everyone has to deal with traffic. But thats my opinion

Re: b16 or LS trans for turbo ls/vtec
 

B-series Tranny Specs

http://hondaswap.com/reference-mater...n-specs-29132/

Re: b16 or LS trans for turbo ls/vtec
 

I run complete Ls cable tranny internals inside of my b16 shell, and I have no problem accelerating even in 5th gear, I setup my vtec to kick at 50% throttle so I can cruise out of vtec, but no matter what gear I'm in I can pickup immediately. my 5th is very long though.

Re: b16 or LS trans for turbo ls/vtec
 

my obd2 s80 gsr trans was 80mph @ 4k 5th gear now i have a obd2 s80 ls and its 90mph @4k -- 5th gear :y

Re: b16 or LS trans for turbo ls/vtec
 

i must have some crazy hybrid stupid ---- tranny...

last i looked. 69-70 mph, I run 4200 rpm.
jdm s1 FTW

Re: b16 or LS trans for turbo ls/vtec
 

I need to change my 2nd and 3rd gear now,
I was at the track yesterday, and I was crossing the 1/4 line in 3rd gear, and 192 kph, almost 120mph. 9400rpm
I usually crossed in 4th redlined at 9400rpm, usually run 12's now I am running 13.1

Re: b16 or LS trans for turbo ls/vtec
 

i have a 4.9 final drive for an obd1+ ls/b16 tranny if you wanna spend money on something

Re: b16 or LS trans for turbo ls/vtec
 

the thing is that I don't understand this whole transmission geqring thing, I am researching to see what I need to do.
I have b16a2 transmission internals in my garage, I just need to figure out whats compatible to run from both transmission to get the most out of my setup.
example 2,3,4 from the b16a2 transmission, and the 1,5 th gear and final drive from the LS transmission. does that make any sense? will that work? the b16 tranny is 4.40 correct?

Re: b16 or LS trans for turbo ls/vtec
 

1 2 is not changeable like the rest
its part of the shaft

besides I like long 1-2 for big power setups
3-4 can be short
the final drive makes you reach redline faster