B16 head gasket. 84mm?????

Reply Subscribe

Thread Tools

Search this Thread

11-26-2008, 05:31 PM

69crx69

0.0 BAR

Thread Starter

Join Date: Feb 2005

Posts: 11

B16 head gasket. 84mm?????

I have a b16 that was bored out to 84mm to clean up some cylinder damage. Now that things are good to go, can I use a b20 Fellpro mls head gasket to finish it off? Or is there something else I should use? Thanks

11-26-2008, 07:49 PM

nascarfan

0.0 BAR

Join Date: Oct 2007

Posts: 0

Re: B16 head gasket. 84mm?????

good god 3mm over bore just to clean up....what the ---- happened?
but yea id rock the b20 headgasket( but mls ones from ebay)

11-26-2008, 08:31 PM

BigBird

0.0 BAR

Join Date: Oct 2005

Posts: 0

Re: B16 head gasket. 84mm?????

Does it have aftermarket sleeves in it?

11-26-2008, 11:40 PM

Ravage70

3.0 BAR

Join Date: Jan 2004

Posts: 5,933

Re: B16 head gasket. 84mm?????

hahahahahahaahahahahahah

CRACK CITY

11-27-2008, 12:20 AM

69crx69

0.0 BAR

Thread Starter

Join Date: Feb 2005

Posts: 11

Re: B16 head gasket. 84mm?????

Of course it has sleeves!!!! You can't bore a b16's stock cylinders out that much. That's ------- retarded! Anyway, the block was at 83mm when I got it. I punched it to 84mm because it was too big of a hassle to get 83.25mm pistons or 85.5mm for that matter.

And there's noooooooooo way I would run a ebay ------ special head gasket in my engine. I was referring the the Felpro Perma-torque MLS head gasket.