B16 head gasket. 84mm?????
 

I have a b16 that was bored out to 84mm to clean up some cylinder damage. Now that things are good to go, can I use a b20 Fellpro mls head gasket to finish it off? Or is there something else I should use? Thanks

Re: B16 head gasket. 84mm?????
 

good god 3mm over bore just to clean up....what the ---- happened?
but yea id rock the b20 headgasket( but mls ones from ebay)

Re: B16 head gasket. 84mm?????
 

Does it have aftermarket sleeves in it? :X

Re: B16 head gasket. 84mm?????
 

hahahahahahaahahahahahah

CRACK CITY

Re: B16 head gasket. 84mm?????
 

Of course it has sleeves!!!! You can't bore a b16's stock cylinders out that much. That's ------- retarded! Anyway, the block was at 83mm when I got it. I punched it to 84mm because it was too big of a hassle to get 83.25mm pistons or 85.5mm for that matter.

And there's noooooooooo way I would run a ebay ------ special head gasket in my engine. I was referring the the Felpro Perma-torque MLS head gasket.

Re: B16 head gasket. 84mm?????
 

Golden eagle headgasket?

Re: B16 head gasket. 84mm?????
 

U cant run a b20 Headgasket on a b16 theirs no hole for the vtec oil.

Re: B16 head gasket. 84mm?????
 

Is there any differance between the gsr head gasket and the b16?