b16 in CRX problems
Well I just finished swaping this b16 that i got from hmotorsonline.com into my 90 crx. So we decied to cracnk her up and the dam car starts to idel from 1k to 2k and it keeps doing that. it threw a code on my zdyne i beleave 13 or 14 blinks. So i replaced the IACV and the bitch still ides from 1-2k then we tryed to fix the timing and it kinda helped now it idels form 1- 1.8k. But its still throwing code 13 IACV. Now i didn't bleed the coolant line so im wondering if ther is a connect from the IACV to the coolant line thats making the car throw a Code. I know that if i don'y bleed it it wil idle like ---- but stull 1-2k back in forth then engine light comes on and it throws a code. Also wt f is a BARO sensor. Thx guys
|
Re:b16 in CRX problems
you have a vac leak somewhere...
|
Re:b16 in CRX problems
and when you replaced your iacv, you have to make sure that its for the exact exact engine or it will keep havin the same problem.
|
Re:b16 in CRX problems
does it go this all the time or just when its warmed up? when i got my b16 it didnt have an iacv on it. and i didnt put a b16 iacv back on it.i think it was from a 86-89 integra.
|
Re:b16 in CRX problems
FYI, no fluid goes through the IACV. nothing.
I think it might be a vac leak, and I would start at the TB. did you adjust the adjuster screw on the IACV? |
Re:b16 in CRX problems
Well it was a vac leak that was making the car idle like that but still now i have a code 14 blinking IACV and my engine light is coming on. I got another IACV but don't no where it came off of since the local tuner shop gave it to me. I think its a obd 1 IACV and that will not work with my pre obd b16 so where can i pick one up off of?? 90-91.5 integra or should my old SI motor IACV fit and can i drive with this problem till i get oney to fix it or will my ---- blow up??
|
Re:b16 in CRX problems
i got lucky and found one on ebay for 10 shiped to my door. i was pretty happy
|
Re:b16 in CRX problems
Originally Posted by sccaeg
FYI, no fluid goes through the IACV. nothing.
I think it might be a vac leak, and I would start at the TB. did you adjust the adjuster screw on the IACV? there is no adjuster screw on the iacv, it's on the TB, for base warm idle. |
Re:b16 in CRX problems
Originally Posted by crx88Si
there is no adjuster screw on the iacv, it's on the TB, for base warm idle.
http://www.newbieforces.com/files/ia...vvvvvvvvvv.jpg |
Re:b16 in CRX problems
adjustment or disassembly? :)
|
All times are GMT -5. The time now is 03:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands