b16 in CRX problems
09-01-2004, 01:32 AM
#1
0.0 BAR
Thread Starter
Join Date: Feb 2004
Posts: 17
b16 in CRX problems
Well I just finished swaping this b16 that i got from hmotorsonline.com into my 90 crx. So we decied to cracnk her up and the dam car starts to idel from 1k to 2k and it keeps doing that. it threw a code on my zdyne i beleave 13 or 14 blinks. So i replaced the IACV and the bitch still ides from 1-2k then we tryed to fix the timing and it kinda helped now it idels form 1- 1.8k. But its still throwing code 13 IACV. Now i didn't bleed the coolant line so im wondering if ther is a connect from the IACV to the coolant line thats making the car throw a Code. I know that if i don'y bleed it it wil idle like ---- but stull 1-2k back in forth then engine light comes on and it throws a code. Also wt f is a BARO sensor. Thx guys
09-01-2004, 09:43 PM
#6
0.0 BAR
Thread Starter
Join Date: Feb 2004
Posts: 17
Re:b16 in CRX problems
Well it was a vac leak that was making the car idle like that but still now i have a code 14 blinking IACV and my engine light is coming on. I got another IACV but don't no where it came off of since the local tuner shop gave it to me. I think its a obd 1 IACV and that will not work with my pre obd b16 so where can i pick one up off of?? 90-91.5 integra or should my old SI motor IACV fit and can i drive with this problem till i get oney to fix it or will my ---- blow up??
09-02-2004, 11:25 AM
#8
3.0 BAR
Join Date: Feb 2003
Posts: 9,089
Re:b16 in CRX problems
Originally Posted by sccaeg
FYI, no fluid goes through the IACV. nothing.
I think it might be a vac leak, and I would start at the TB.
did you adjust the adjuster screw on the IACV?
I think it might be a vac leak, and I would start at the TB.
did you adjust the adjuster screw on the IACV?
there is no adjuster screw on the iacv, it's on the TB, for base warm idle.
