I have a s80 hydraulic tranny (gsr) and I also have a ys1 cable tranny with half shaft and axles.

I was told I can use my half shaft from the ys1 on the s80 but i have to change this out:
http://honda-tech.com/zerothread/1605563

So can I use the axle for that side as well or do I need a 94-01 axles?

 

Thats a good write up, Xgen is on here similar name you can probably ask him but 90-01 passanger axles are the same, the driver side is dependent on the mid shaft