if you use motor oil torque them to the stock spec, if you use the moly that comes with them use the torque specs from the kit. The sheet that comes with them actually tells you this, I just went through this today with a friend.

xstreetfiendx is right, the ARP's work differently then the stocker bolts. As long as you thread the stem/rod into the block without bottoming it out, and them torque the nuts on properly in the right order everything with torque together at the same rating. Meaning both the rod into the block and the nut onto the rod.

Your flywheel uses 12pt, but I guess you haven't attacked that yet.

 

I did my arps, 25ft lbs all, followed by 45ft lbs , then 65ft lbs .

 

re-used Stockers FTW