a6/zc pistons in d15 block
want to know if piston domes will work with out colliding with head
|
Re: a6/zc pistons in d15 block
please give imput
|
Re: a6/zc pistons in d15 block
since the pistons are shorter, they won't hit.
ZC pistons in a D15 only bump the comression .2, better off to shave the head .040" and run stock PM3 pistons. This assumes normal 134mm D15 rods. |
Re: a6/zc pistons in d15 block
is it possible to run the dohc zc pistons ?
|
Re: a6/zc pistons in d15 block
Originally Posted by bitchasscracker
is it possible to run the dohc zc pistons ?
|
Re: a6/zc pistons in d15 block
but it can be done ?
|
Re: a6/zc pistons in d15 block
Originally Posted by bitchasscracker
but it can be done ?
|
Re: a6/zc pistons in d15 block
Originally Posted by sikcrx89
yes.. i am throwing an a6/zc piston mini me combo together right now.. with the cc chambers on a z6 head using the a6 block and rods it nets like 12.3:1
i know that works i'm talking about a d15 with dohc zc pistons and a z6 head |
Re: a6/zc pistons in d15 block
Originally Posted by bitchasscracker
i know that works i'm talking about a d15 with dohc zc pistons and a z6 head |
Re: a6/zc pistons in d15 block
Originally Posted by sikcrx89
why wouldnt it all D have the same deck height just different combustion chambers
i thought the wrist pin location was different on the d15 than the d16's |
All times are GMT -5. The time now is 10:30 PM. |
© 2024 MH Sub I, LLC dba Internet Brands