A1 pistons in a y8 engine
#11
Guest
Posts: n/a
Re:A1 pistons in a y8 engine
I haven't done a mini with A1 psitons before, but my A6/Z6 block/head motor ran ~145hp with ALL my mods, the motor alone was only ~125-130ish.
With those pistons in there..I could easy it easily pulling high 150s with good mods.
With those pistons in there..I could easy it easily pulling high 150s with good mods.
#13
Re:A1 pistons in a y8 engine
Well guys iam gonna try to put the engine togther with a1 pistons.My goal is to have around 180whp The list of stuff iam getting to run this **** is:
-Already port and polished my head
-A1 pistons and rods (maybe ill go with eagle rods but my budget sucks
- Knife edged/balanced crank that i got off ebay for 200
-KMS BlockGuard
-DC 4-1 header
-Hayamusa universal muffler no cat custom exhaust
-KMS racing valves
-KMS racing vlavespring and retainer kit
-Skunk 2 cam gear
-ARP head Studs
-Venom fuel rail
-320cc injectors
-used BBK throttle body
-MSD turbo fuel pump
-Act stage 2 clutch
-Act streetlite 11.9 flywheel (or should i go with 8.4lb?)
-MSD ignition
- Iam gonna get probably APEX'i SAFC for mangemanet
-Probably a camshaft but that will come after the engine is done cause i wanna see how it will behave with the stock one. Also for the people who have y8 are your camshafts ALL black?
-probably more but i dont have a great budget so i gotta be economic for right now
also if you have any suggestions or questions please let me know thanks.
-Already port and polished my head
-A1 pistons and rods (maybe ill go with eagle rods but my budget sucks
- Knife edged/balanced crank that i got off ebay for 200
-KMS BlockGuard
-DC 4-1 header
-Hayamusa universal muffler no cat custom exhaust
-KMS racing valves
-KMS racing vlavespring and retainer kit
-Skunk 2 cam gear
-ARP head Studs
-Venom fuel rail
-320cc injectors
-used BBK throttle body
-MSD turbo fuel pump
-Act stage 2 clutch
-Act streetlite 11.9 flywheel (or should i go with 8.4lb?)
-MSD ignition
- Iam gonna get probably APEX'i SAFC for mangemanet
-Probably a camshaft but that will come after the engine is done cause i wanna see how it will behave with the stock one. Also for the people who have y8 are your camshafts ALL black?
-probably more but i dont have a great budget so i gotta be economic for right now
also if you have any suggestions or questions please let me know thanks.
#15
Re:A1 pistons in a y8 engine
well thats my goal i tprobably wont happen but in that range it would be nice. theres the d16 160whp motor on ebay and the block isnt even that built. I dunno do you think its to much for all motor?
http://cgi.ebay.com/ebaymotors/ws/eB...category=33615
http://cgi.ebay.com/ebaymotors/ws/eB...category=33615
#16
Re:A1 pistons in a y8 engine
lol, thats a ripoff.
curious how B-series 81mm pistons get fitted on stock sleeves?
My block was .20 over and I used 77mm pistons, and that is pretty much the maxium you can even go.
for that amount of money a B-series swap would walk all over that.
Jeff
curious how B-series 81mm pistons get fitted on stock sleeves?
My block was .20 over and I used 77mm pistons, and that is pretty much the maxium you can even go.
for that amount of money a B-series swap would walk all over that.
Jeff
#17
Guest
Posts: n/a
Re:A1 pistons in a y8 engine
My buddy is going for the "first in Kansas City" 13 second daily driven SOHC. It's OK, I'll beat him with the first 12 second daily driven SOHC. Muahahah.
I'll snap some pics of my Mini build. My g/f is tired of all the engines in my APARTMENT! Hahahah..
I'll snap some pics of my Mini build. My g/f is tired of all the engines in my APARTMENT! Hahahah..
Thread
Thread Starter
Forum
Replies
Last Post
ososlohatch
Turbo Parts For Sale
5
05-18-2005 03:39 AM
ComputerJLT
Turbo Parts For Sale
3
11-18-2004 10:11 PM